v10p6-m3, V10P6HM3 www.vishay.com vishay general semiconductor revision: 04-may-15 1 document number: 87711 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high current density surface mount trench mos barrier schottky rectifier ultra low v f = 0.35 v at i f = 5 a features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? aec-q101 qualified available ? - automotive ordering code; base p/nhm3 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in low voltage high frequency inverters, freewheeling, dc/dc converte rs, and polarity protection applications. mechanical data case: to-277a (smpc) ? molding compound meets ul 94 v-0 flammability rating ? base p/n-m3 - halogen-free, rohs-compliant, and commercial grade ? base p/nhm3 - halogen-free, rohs-compliant, and aec-q101 qualified ? base p/nhm3_x - halogen-free, rohs-compliant, and aec-q101 qualified ? (_x denotes revision code e.g. a, b,.....) terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 2 whisker test, hm3 suffix meets jesd 201 class 2 whisker test notes (1) mounted on 30 mm x 30 mm pad areas aluminum pcb (2) free air, mounted on recommended copper pad area primary characteristics i f(av) 10 a v rrm 60 v i fsm 180 a v f at i f = 10 a (t a = 125 c) 0.44 v t j max. 150 c package to-277a (smpc) diode variation single die k 2 1 to-277a ( s mpc) tmb s ? e s mp ? s eries anode 1 anode 2 cathode k availa b le maximum ratings (t a = 25 c unless otherwise noted) parameter symbol v10p6 unit device marking code v106 maximum repetitive pe ak reverse voltage v rrm 60 v maximum average forward rectified current (fig. 1) i f (1) 10 a i f (2) 4.3 peak forward surge current 10 ms single ha lf sine-wave ? superimposed on rated load i fsm 180 a voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction and storage temperature range t j , t stg -40 to +150 c
v10p6-m3, V10P6HM3 www.vishay.com vishay general semiconductor revision: 04-may-15 2 document number: 87711 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width ? 5 ms notes (1) the heat generated must be less than the thermal conductivity from junction to ambient: dp d /dt j < 1/r ? ja (2) free air mounted on recommended copper pad area; thermal resistance r ? ja - junction to ambient (3) mounted on 30 mm x 30 mm aluminum pcb; thermal resistance r ? jm - junction to mount note (1) aec-q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - forward power loss characteristics electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage i f = 5.0 a t a = 25 c v f (1) 0.44 - v i f = 10 a 0.51 0.59 i f = 5.0 a t a = 125 c 0.35 - i f = 10 a 0.44 0.53 reverse current v r = 60 v t a = 25 c i r (2) -1.9 ma t a = 125 c 14 55 thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol v10p6 unit typical thermal resistance r ? ja (1)(2) 75 c/w r ? jm (3) 4 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode v10p6-m3/86a 0.10 86a 1500 7" diam eter plastic tape and reel v10p6-m3/87a 0.10 87a 6500 13" diameter plastic tape and reel V10P6HM3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel V10P6HM3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel V10P6HM3_a/h (1) 0.10 h 1500 7" diameter plastic tape and reel V10P6HM3_a/i (1) 0.10 i 6500 13" diameter plastic tape and reel 0 1 2 3 4 5 6 7 8 9 10 11 0 255075100125150 average forward rectified current (a) mount temperature ( c) t m = 130 c, r thjm = 4 c/w t a = 25 c, r thja = 75 c/w 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0123456789101112 average power lo ss (w) average forward current (a) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 1.0 d = 0.8 d = t p /t t t p
v10p6-m3, V10P6HM3 www.vishay.com vishay general semiconductor revision: 04-may-15 3 document number: 87711 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance 0.1 1 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 in s tantaneou s forward current (a) in s tantaneou s forward voltage (v) t a = 150 c t a = 25 c t a = 100 c t a = 125 c 0.001 0.01 0.1 1 10 100 20 40 60 80 100 in s tantaneou s rever s e current (ma) percent of rated peak rever s e voltage (%) t a = 150 c t a = 125 c t a = 100 c t a = 25 c 100 1000 10 000 0.1 1 10 100 junction capacitance (pf) rever s e voltage (v) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p 1 10 100 0.01 0.1 1 10 100 tran s ient thermal impedance ( c/w) t - pul s e duration ( s ) junction to ambient
v10p6-m3, V10P6HM3 www.vishay.com vishay general semiconductor revision: 04-may-15 4 document number: 87711 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) conform to jedec ? to-277a to-277a ( s mpc) 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) nom. 0.084 (2.13) nom. 0.155 (3.94) nom. mountin g pad layout 0.268 (6.80) 0.186 (4.72) min. 0.050 (1.27) min. 0.041 (1.04) 0.055 (1.40) min. 0.189 (4.80) min. 0.187 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 0.171 (4.35) 0.167 (4.25) k 2 1
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
